- ⭐ – Most used in JEE
- ⚠️ – Common Mistake
- 💡 – Memory Hint
Magnetic Force
| Concept | Formula | Symbols Meaning | SI Units | Key Notes / Tricks |
|---|---|---|---|---|
| Force on Charge | [\vec{F} = q \vec{v} \times \vec{B}] | [q] = charge, [v] = velocity, [B] = magnetic field | N | Perpendicular force ⭐ |
| Magnitude | [F = qvB\sin\theta] | [\theta] = angle between [v] and [B] | N | Zero if parallel ⚠️ |
💡 Memory Hint:
Magnetic force → always perpendicular
Motion in Magnetic Field
| Concept | Formula | Symbols Meaning | SI Units | Key Notes / Tricks |
|---|---|---|---|---|
| Radius | [r = \dfrac{mv}{qB}] | [m] = mass | m | Circular motion ⭐ |
| Time Period | [T = \dfrac{2\pi m}{qB}] | — | s | Independent of speed ⭐ |
| Frequency | [f = \dfrac{qB}{2\pi m}] | — | Hz | Cyclotron frequency |
| Pitch (Helical) | [p = v_\parallel T] | [v_\parallel] = parallel component | m | Spiral motion |
💡 Memory Hint:
Magnetic field changes direction, not speed
Force on Current-Carrying Conductor
| Concept | Formula | Symbols Meaning | SI Units | Key Notes / Tricks |
|---|---|---|---|---|
| Force | [\vec{F} = I \vec{L} \times \vec{B}] | [I] = current, [L] = length vector | N | Fleming’s left-hand rule ⭐ |
| Magnitude | [F = BIL\sin\theta] | — | N | Max when perpendicular ⭐ |
💡 Memory Hint:
Use left-hand rule for direction
Torque on Current Loop
| Concept | Formula | Symbols Meaning | SI Units | Key Notes / Tricks |
|---|---|---|---|---|
| Torque | [\tau = NIAB\sin\theta] | [N] = turns, [A] = area | N·m | Rotates loop ⭐ |
| Magnetic Moment | [m = NIA] | [m] = magnetic moment | A·m² | Important ⭐ |
| Torque Form | [\tau = mB\sin\theta] | — | N·m | Simplified form |
💡 Memory Hint:
Loop behaves like a magnetic dipole
Biot–Savart Law
| Concept | Formula | Symbols Meaning | SI Units | Key Notes / Tricks |
|---|---|---|---|---|
| Biot–Savart Law | [dB = \dfrac{\mu_0}{4\pi} \dfrac{Idl\sin\theta}{r^2}] | [\mu_0] = permeability | T | Basic law ⭐ |
💡 Memory Hint:
Current element produces magnetic field
Magnetic Field Due to Current
| System | Formula | Symbols Meaning | SI Units | Key Notes / Tricks |
|---|---|---|---|---|
| Straight Wire | [B = \dfrac{\mu_0 I}{2\pi r}] | [r] = distance | T | Circular field ⭐ |
| Circular Loop (center) | [B = \dfrac{\mu_0 I}{2R}] | [R] = radius | T | Important ⭐ |
| Solenoid | [B = \mu_0 n I] | [n] = turns per length | T | Uniform field ⭐ |
| Toroid | [B = \dfrac{\mu_0 NI}{2\pi r}] | — | T | Inside only ⚠️ |
💡 Memory Hint:
More current → stronger magnetic field
Ampere’s Circuital Law
| Concept | Formula | Symbols Meaning | SI Units | Key Notes / Tricks |
|---|---|---|---|---|
| Ampere Law | [\oint \vec{B}\cdot d\vec{l} = \mu_0 I_{enc}] | [I_{enc}] = enclosed current | — | Used in symmetry ⭐ |
💡 Memory Hint:
Magnetic field depends on enclosed current
Force Between Two Parallel Wires
| Concept | Formula | Symbols Meaning | SI Units | Key Notes / Tricks |
|---|---|---|---|---|
| Force per Length | [\dfrac{F}{L} = \dfrac{\mu_0 I_1 I_2}{2\pi r}] | — | N/m | Defines ampere ⭐ |
| Nature | Attraction/Repulsion | — | — | Same → attract ⭐ |
💡 Memory Hint:
Same direction → attract
Magnetic Dipole (Bar Magnet)
| Concept | Formula | Symbols Meaning | SI Units | Key Notes / Tricks |
|---|---|---|---|---|
| Dipole Moment | [M = m \cdot 2l] | [m] = pole strength | A·m² | Analog of electric dipole ⭐ |
| Torque | [\tau = MB\sin\theta] | — | N·m | Aligns with field |
| Potential Energy | [U = -MB\cos\theta] | — | J | Stable when aligned ⭐ |
💡 Memory Hint:
Magnet tries to align with field
Galvanometer
| Concept | Formula | Symbols Meaning | SI Units | Key Notes / Tricks |
|---|---|---|---|---|
| Current Sensitivity | [S_i = \dfrac{\theta}{I}] | [\theta] = deflection | — | Higher → more sensitive |
| Voltage Sensitivity | [S_v = \dfrac{\theta}{V}] | — | — | Depends on resistance |
💡 Memory Hint:
Galvanometer → detects small current
Conversion of Galvanometer
| Concept | Formula | Symbols Meaning | SI Units | Key Notes / Tricks |
|---|---|---|---|---|
| Ammeter | [S = \dfrac{IG}{I – IG}] | [S] = shunt resistance | Ω | Parallel connection ⭐ |
| Voltmeter | [R = \dfrac{V}{IG} – G] | [G] = galvanometer resistance | Ω | Series connection ⭐ |
💡 Memory Hint:
- Ammeter → low resistance
- Voltmeter → high resistance